DIY

Ever since the Renegade Craft Fair, I’ve been itching to do some sort of project. Not too long ago I was browsing design sponge and I spotted what looked to be an easy DIY project! Unfortunately, I didn’t find any instructions on how to go about doing this task so I decided to wing it. I’ve been looking for something fun and original to fill this empty wall in our master bedroom. I thought I would try this out and see how it turned out. If it was a flop, at least I tried!

::Materials::



Circular Wooden Embroidery Hoops: your choice as to how many and what size
Various patterns of fabric: your choice of color and design. Just remember too much is better than not enough. 
Fabric scissors
Iron: this is optional, but I like to iron out my fabric before projects, wrinkles are the worst.

::Directions::

Step 1

Iron out your fabric and make sure all the fine wrinkles are no longer visible

Step 2

Unscrew first hoop and seperate the inner/outer hoop.

Step 3

Place fabric in between both hoops and push smaller hoop back into the larger hoop.
Step 4

Pull fabric tightly through both hoops and slowly tighten screw on the outer hoop. Make sure the fabric is as tight and secure as possible.
Step 5

Fasten screw as much as it will allow and cut excess fabric along the sides of the hoop. 
Step 6

Repeat steps 1 through 5 for each of your hoops
Now you’re ready to hang your easy and fun DIY project! Suddenly, that itch is no longer there…for now anyway! 
xoxo 
Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: