DIY + Industrial + Pipe + Shelving

I know, it’s been months since we finished our bedroom makeover! Life has changed very drastically, so please forgive me that it took me this long to share the DIY shelving with you! But you are here and that’s good! 

DIY + Industrial + Pipe + Shelving

I am in love with this industrial shelving we created as a wall unit/closet! It really pops with the white walls and we are even in the process of designing another wall unit for our living area. It has a unique look you just won’t find anywhere else. To achieve this great look you will need:

DIY + Industrial + Pipe + Shelving

Plywood

Stain (optional)

Various 1/2″ threaded black steel pipes and fittings

Drywall screws

Orange hand cleaner

Sand Paper

Tack cloth

Table Saw

Drill and 7/8″ spade drill bit

*nipples: set lengths of pre-threaded 1/2″ pipe

DIY + Industrial + Pipe + Shelving

This project is pretty easy – you will just have to be doing a lot of measuring and pre-planning. Come up with a design that you want for your wall unit. It doesn’t have to be exactly like what we have done. We built our shelving around our bed and added a closet as well. Draw a rough draft of what you are wanting and measure, measure, measure. Once you have all your measurements, you will want to decide how long and deep you would like your shelves so you can plan out how much plywood and piping to buy. As well as where you will need to cut your plywood. You will need an assortment of 1/2″ nipple lengths, tees, 90 degree elbows, caps, and floor flanges. We ordered ours online, which saved us a whole lot of money!  We wanted a few short shelves on the side of the bed, but longer shelves above the bed. It was a huge headaches at times, so don’t be discouraged if you find yourself scratching your head once in a while. It will come together. 

DIY + Industrial + Pipe + Shelving

Once we got all our pieces for the shelving, my very talented husband (who, let’s face it – did pretty much all the work) cut the wood according to the measurements we made. We sanded the wood, cleaned it off and stained it (which is optional). Any nipples over 12″ have a greasy black film on them. This isn’t something you want, since it can wreck clothing and other materials. My hubby used a palm sander and sanded off the black exterior, took a rag with fast orange hand cleaner and cleaned off the pipes. He drilled holes in the plywood for the piping to go through. Since these pipes will be mounting to the wall, the holes will need to be measured according to the studs in the wall. Starting at the bottom, he screwed together the fittings for the first level of shelving. This will be the only section of the shelving that will have floor flanges on the base. After the first level, you can put your first piece of plywood and then continue all the way to the top. The very top section, will be anchored to the wall with a floor flange. It doesn’t sound easy, but once you get going it’s not so bad.

DIY + Industrial + Pipe + Shelving

Remember, if you ever have questions you can always email us! We have already had a few questions regarding this project and others. We would be happy to help and explain more if need be! We are thrilled with all that work – it sure paid off. Trust me, if it wasn’t easy we would not be doing this for our living room! Can’t wait to share pictures of that when we are done with the revamp! 

What do you think of this style of shelving? Would you ever be interested in pulling this off in your home?

XOXO, Lidy

Feel free to leave a comment!

 You can also follow Hello Lidy by email, PinterestFacebookTwitter, or Instagram

 

 

 

DIY Paper Animal Heads
Home Inspiration
Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: