How to Remove Super Glue From Plastic

Do you want to know how to remove super glue from plastic without causing any damage to the product? This article might help you with all the relevant information.

How to Remove Super Glue From Plastic1
oola

Super glue is a powerful adhesive formulated to bond immediately and fix any broken item. From quick repairs to different craft projects, there are many uses for super glue. However, if you’re planning to use super glue on any plastic item, you must be cautious as accidents might happen. To understand how to remove super glue from plastic, keep reading this informative article. This article will not only guide you about removing super glue from plastic, but it also has some precautionary points that will aid you in the process.

How to Remove Super Glue From Plastic?How to Remove Super Glue From Plastic2

Super glue is an amazing tool for DIYs until you have to remove it, especially from a plastic surface. Nevertheless, super glue stains are unavoidable when you’re making repairs or doing any craft project. If you are facing such a situation, don’t fret, you can get the hardened glue off the plastic surfaces using the below tricks.

1. Soapy Water

Soapy Water for Super Glue
nytimes

To get rid of superglue from plastic, pour 10-15 drops of dawn dish soap in a bowl of tepid water and dip a cloth in this solution. Next, put the wet cloth over the dried super glue and cover it with a plastic sheet for 4-5 hours. Once the glue becomes soft, wipe it with a warm cloth. Redo until the glue is gone.

2. WD-40WD-40 for Super Glue

With a ton of household uses, WD-40 is an ideal means to remove super glue. It permeates the adhesive, thereby loosens the obstinate sticky super glue. Just spritz WD-40 on the glue and leave it for 2-3 minutes to soften the adhesive. Once it’s done, remove the super glue with a cloth.

3. Try VinegarHow to Remove Super Glue From Plastic3

Vinegar is an excellent ingredient to get rid of hardened super glue from plastic. This method works due to the vinegar’s acidic content. Simply saturate a cloth in white vinegar, place it on the dried super glue, and wrap it with a plastic sheet. Wait for a couple of hours and then work the adhesive away with a credit card.

4. Use NitromethaneUse Nitromethane for Super Glue

Nitromethane is a debonding tool that removes dried super glue quickly from a plastic surface without creating a mess. Take a little amount of this solution on a cloth and blot the adhesive until it’s gone. Nitromethane is safe to use on plastic surfaces. However, try this solution on an inconspicuous spot first to avoid damage.

5. Rubbing Alcohol

All you need is rubbing alcohol to take off super glue from the plastic as it breaks down the glue easily. Begin by soaking a clean cloth in rubbing alcohol and dab the superglue with it until it starts to dissolve or peel off. After that, wipe it using a soft cloth.

6. Acetone

Acetone is an ideal remedy to soften the bond of stubborn super glue from plastic. You can use either pure acetone or nail polish remover containing acetone for this hack. For this approach, saturate the dried super glue with an acetone-dipped cotton pad and then take it off using a rubber or silicone spatula.

7. Mineral Spirits

How to Remove Super Glue From Plastic4

Often used as a paint thinner, mineral spirits also work against super glue by breaking its bond from the plastic surface. Simply dab the problematic spot with mineral spirits and wait until the adhesive dissolves. Once it’s done, rub it off using an abrasive sponge.

8. Knife/Razor Blade

If non of the above methods works for you, then try the knife/razor blade hack. Grab a knife or razor blade and gently scrape the dried super glue. Take great care while doing this hack as it can damage the plastic surface.

Precautions to Consider

Before removing super glue, read the below precautionary measures carefully.

  • Wear safety goggles, a face mask, hand gloves, and full-sleeved clothing.
  • Keep WD-40 and nitromethane far away from the reach of children and pets.
  • While using WD-40, make sure the area is properly ventilated.
  • Before using acetone, use it on an inconspicuous part of the plastic, as it can cause damage to some types of plastic surfaces.

Conclusion

By trying the above methods, you’ll surely remove the superglue from plastic products in no time. Let us know your valuable suggestions and queries in the comments section below; we would love to hear from you.

Latest Post
Related Posts

LEAVE A REPLY

Please enter your comment!
Please enter your name here